General information
BT series
BT is a series of high-performance wall-mounted solenoid metering pumps, widely used in water treatment, wastewater treatment, food and chemical industry, electroplating, paint industry, agriculture and other industries.
The pumps are housed in an acid-resistant aluminum housing coated with two layers of epoxy paint, and the control panel is protected by a transparent polycarbonate cover. This is a high-performance series capable of providing a flow rate of the pumped reagent up to 80 l/hour.
Data
TECHNICAL SPECIFICATIONS
Max flow rate, l/h
80
Max pressure, bar
20
Max strokes per minute
180
Max suction height, m
2
Connection 5-10-20, mm
4х6
Connection 30-50-80, mm
10х14
Voltage, V
230
Current, Hz
50
Consumed power, W
93-124
Net weight, kg
4,7-5,7
Protection
IP 65
Management
Series models
Available in a variety of options to provide a more flexible approach to the dosing control process for each specific task.
MA/AD
Analog model with manual ON/OFF dosing mode.
MA/M
Digital model with manual ON/OFF dosing mode.
CC/M
Proportional dosing from an external mA signal, as well as a constant ON/OFF mode.
VFT
Proportional dosing from the pulse flow meter and manual ON/OFF mode.
MF
Proportional dosing from the pulse flow meter, from the external mA signal, and manual ON/OFF mode.
PH-RX-CL
Proportional dosing from the pH, RX, or CL sensor with a built-in controller and manual ON/OFF mode.
General information
BT series
BT is a series of high-performance wall-mounted solenoid metering pumps, widely used in water treatment, wastewater treatment, food and chemical industry, electroplating, paint industry, agriculture and other industries.
The pumps are housed in an acid-resistant aluminum housing coated with two layers of epoxy paint, and the control panel is protected by a transparent polycarbonate cover. This is a high-performance series capable of providing a flow rate of the pumped reagent up to 80 l/hour.
Management
Models of the series
Presented in various options to better adapt to the dosing management process for each specific task.
MA/AD
Analog model with manual ON/OFF dosing mode.
MA/M
Digital model with manual ON/OFF dosing mode.
VFT
Proportional dosing from the pulse flow meter and manual ON/OFF mode.
MF
Proportional dosing from the pulse flow meter, from the external mA signal, and manual ON/OFF mode.
PH-RX-CL
Proportional dosing from the pH, RX, or CL sensor with a built-in controller and manual ON/OFF mode.
Data
TECHNICAL SPECIFICATIONS
Max flow rate, l/h
80
Max pressure, bar
20
Max strokes per minute
180
Max suction height, m
2
Connection 5-10-20, mm
4х6
Connection 30-50-80, mm
10х14
Voltage, V
230
Current, Hz
50
Consumed power, W
93-124
Net weight, kg
4,7-5,7
Protection
IP 65
Contacts
CONTACT US
we’ll help you solve all your questions:
+375 17 3780922
Contact center
+375 29 1319115
For legal entities
info@ntbel.com
Minsk, Babushkina St.,
6A, office 314, 220024
Address
or
fill out the form:
Applications
Application sectors
dosing pumps of the BT series:
Production of biodiesel
Ceramic, stone, marble and glass
Sector of the chemical industry
Sector of graphic industry
Galvanic and electronic industry
Manufacture of motor vehicles
Mechanical industry
Sector of paint industry
Sector of Oil & Gas
Gold processing industry
Water treatment industry
Textile and leather
Packing, glue, paper and paper
Applications
Application sectors
they can be used in following industries:
Production and storage of biodiesel
Manufacture of motor vehicles
Textile and leather
Ceramic, stone, marble, glass and mining industry
Mechanical industry
Sector of the chemical industry
Paint industry
Sector of graphic industry
Oil & Gas
Packing, glue, paper and paper mill
Gold processing industry
Galvanic and electronic industry
Water treatment industry
Applications
Application sectors
they can be used in following industries:
Production of biodiesel
Manufacture of motor vehicles
Textile and leather industry
Ceramic, stone, marble and glass
Mechanical industry
Sector of the chemical industry
Sector of paint industry
Sector of graphic industry
Sector of Oil & Gas
Packing, glue, paper and paper
Galvanic and electronic industry
Water treatment industry
General information
BT series
BT is a series of high-performance wall-mounted solenoid metering pumps, widely used in water treatment, wastewater treatment, food and chemical industry, electroplating, paint industry, agriculture and other industries.
The pumps are housed in an acid-resistant aluminum housing coated with two layers of epoxy paint, and the control panel is protected by a transparent polycarbonate cover. This is a high-performance series capable of providing a flow rate of the pumped reagent up to 80 l/hour.
Data
TECHNICAL SPECIFICATIONS
Max flow rate, l/h
80
Max pressure, bar
20
Max strokes per minute
180
Max suction height, m
2
Connection 5-10-20, mm
4х6
Connection 30-50-80, mm
10х14
Voltage, V
230
Current, Hz
50
Consumed power, W
93-124
Net weight, kg
4,7-5,7
Protection
IP 65
Management
Series models
Available in a variety of options to provide a more flexible approach to the dosing control process for each specific task.
MA/AD
Analog model with manual ON/OFF dosing mode.
MA/M
Digital model with manual ON/OFF dosing mode.
CC/M
Proportional dosing from an external mA signal, as well as a constant ON/OFF mode.
VFT
Proportional dosing from the pulse flow meter and manual ON/OFF mode.
MF
Proportional dosing from the pulse flow meter, from the external mA signal, and manual ON/OFF mode.
PH-RX-CL
Proportional dosing from the pH, RX, or CL sensor with a built-in controller and manual ON/OFF mode.
General information
BT series
BT is a series of high-performance wall-mounted solenoid metering pumps, widely used in water treatment, wastewater treatment, food and chemical industry, electroplating, paint industry, agriculture and other industries.
The pumps are housed in an acid-resistant aluminum housing coated with two layers of epoxy paint, and the control panel is protected by a transparent polycarbonate cover. This is a high-performance series capable of providing a flow rate of the pumped reagent up to 80 l/hour.
Management
Models of the series
Presented in various options to better adapt to the dosing management process for each specific task.
MA/AD
Analog model with manual ON/OFF dosing mode.
MA/M
Digital model with manual ON/OFF dosing mode.
VFT
Proportional dosing from the pulse flow meter and manual ON/OFF mode.
MF
Proportional dosing from the pulse flow meter, from the external mA signal, and manual ON/OFF mode.
PH-RX-CL
Proportional dosing from the pH, RX, or CL sensor with a built-in controller and manual ON/OFF mode.
Data
TECHNICAL SPECIFICATIONS
Max flow rate, l/h
80
Max pressure, bar
20
Max strokes per minute
180
Max suction height, m
2
Connection 5-10-20, mm
4х6
Connection 30-50-80, mm
10х14
Voltage, V
230
Current, Hz
50
Consumed power, W
93-124
Net weight, kg
4,7-5,7
Protection
IP 65
Contacts
CONTACT US
we’ll help you solve all your questions:
+375 17 3780922
Contact center
+375 29 1319115
For legal entities
info@ntbel.com
Minsk, Babushkina St.,
6A, office 314, 220024
Address
or
fill out the form:
Applications
Application sectors
dosing pumps of the BT series:
Production of biodiesel
Ceramic, stone, marble and glass
Sector of the chemical industry
Sector of graphic industry
Galvanic and electronic industry
Manufacture of motor vehicles
Mechanical industry
Sector of paint industry
Sector of Oil & Gas
Gold processing industry
Water treatment industry
Textile and leather
Packing, glue, paper and paper
Applications
Application sectors
they can be used in following industries:
Production and storage of biodiesel
Manufacture of motor vehicles
Textile and leather
Ceramic, stone, marble, glass and mining industry
Mechanical industry
Sector of the chemical industry
Paint industry
Sector of graphic industry
Oil & Gas
Packing, glue, paper and paper mill
Gold processing industry
Galvanic and electronic industry
Water treatment industry
Applications
Application sectors
they can be used in following industries:
Production of biodiesel
Manufacture of motor vehicles
Textile and leather industry
Ceramic, stone, marble and glass
Mechanical industry
Sector of the chemical industry
Sector of paint industry
Sector of graphic industry
Sector of Oil & Gas
Packing, glue, paper and paper
Galvanic and electronic industry
Water treatment industry
General information
BT series
BT is a series of high-performance wall-mounted solenoid metering pumps, widely used in water treatment, wastewater treatment, food and chemical industry, electroplating, paint industry, agriculture and other industries.
The pumps are housed in an acid-resistant aluminum housing coated with two layers of epoxy paint, and the control panel is protected by a transparent polycarbonate cover. This is a high-performance series capable of providing a flow rate of the pumped reagent up to 80 l/hour.
Data
TECHNICAL SPECIFICATIONS
Max flow rate, l/h
80
Max pressure, bar
20
Max strokes per minute
180
Max suction height, m
2
Connection 5-10-20, mm
4х6
Connection 30-50-80, mm
10х14
Voltage, V
230
Current, Hz
50
Consumed power, W
93-124
Net weight, kg
4,7-5,7
Protection
IP 65
Management
Series models
Available in a variety of options to provide a more flexible approach to the dosing control process for each specific task.
MA/AD
Analog model with manual ON/OFF dosing mode.
MA/M
Digital model with manual ON/OFF dosing mode.
CC/M
Proportional dosing from an external mA signal, as well as a constant ON/OFF mode.
VFT
Proportional dosing from the pulse flow meter and manual ON/OFF mode.
MF
Proportional dosing from the pulse flow meter, from the external mA signal, and manual ON/OFF mode.
PH-RX-CL
Proportional dosing from the pH, RX, or CL sensor with a built-in controller and manual ON/OFF mode.
General information
BT series
BT is a series of high-performance wall-mounted solenoid metering pumps, widely used in water treatment, wastewater treatment, food and chemical industry, electroplating, paint industry, agriculture and other industries.
The pumps are housed in an acid-resistant aluminum housing coated with two layers of epoxy paint, and the control panel is protected by a transparent polycarbonate cover. This is a high-performance series capable of providing a flow rate of the pumped reagent up to 80 l/hour.
Management
Models of the series
Presented in various options to better adapt to the dosing management process for each specific task.
MA/AD
Analog model with manual ON/OFF dosing mode.
MA/M
Digital model with manual ON/OFF dosing mode.
VFT
Proportional dosing from the pulse flow meter and manual ON/OFF mode.
MF
Proportional dosing from the pulse flow meter, from the external mA signal, and manual ON/OFF mode.
PH-RX-CL
Proportional dosing from the pH, RX, or CL sensor with a built-in controller and manual ON/OFF mode.
Data
TECHNICAL SPECIFICATIONS
Max flow rate, l/h
80
Max pressure, bar
20
Max strokes per minute
180
Max suction height, m
2
Connection 5-10-20, mm
4х6
Connection 30-50-80, mm
10х14
Voltage, V
230
Current, Hz
50
Consumed power, W
93-124
Net weight, kg
4,7-5,7
Protection
IP 65
Contacts
CONTACT US
we’ll help you solve all your questions:
+375 17 3780922
Contact center
+375 29 1319115
For legal entities
info@ntbel.com
Minsk, Babushkina St.,
6A, office 314, 220024
Address
or
fill out the form:
Applications
Application sectors
dosing pumps of the BT series:
Production of biodiesel
Ceramic, stone, marble and glass
Sector of the chemical industry
Sector of graphic industry
Galvanic and electronic industry
Manufacture of motor vehicles
Mechanical industry
Sector of paint industry
Sector of Oil & Gas
Gold processing industry
Water treatment industry
Textile and leather
Packing, glue, paper and paper
Applications
Application sectors
they can be used in following industries:
Production and storage of biodiesel
Manufacture of motor vehicles
Textile and leather
Ceramic, stone, marble, glass and mining industry
Mechanical industry
Sector of the chemical industry
Paint industry
Sector of graphic industry
Oil & Gas
Packing, glue, paper and paper mill
Gold processing industry
Galvanic and electronic industry
Water treatment industry
Applications
Application sectors
they can be used in following industries:
Production of biodiesel
Manufacture of motor vehicles
Textile and leather industry
Ceramic, stone, marble and glass
Mechanical industry
Sector of the chemical industry
Sector of paint industry
Sector of graphic industry
Sector of Oil & Gas
Packing, glue, paper and paper
Galvanic and electronic industry
Water treatment industry