General information
F series
F is a series of frameless compact peristaltic dosing pumps with constant performance. Designed for organizing non-pressure dosing.
The pumps are made in an acid-resistant plastic case, the working body and hose are protected by a transparent polycarbonate cover.
Dosing mode: basic ON/OFF, performance adjustment on request.
General information
B series
Peristaltic compact dispensers with adjustable output in the range of 10-100% output. Adjustment is made using a potentiometer.
The pumps are made in an acid-resistant plastic case, the working body and hose are protected by a transparent polycarbonate cover.
There is an LED indicator on the front side to display the operating mode.
General information
BH series
Peristaltic dispensers with increased productivity. Performance adjustment is carried out using a potentiometer in the range of 0-100%.
The pumps are made in an acid-resistant plastic case, the working body and hose are protected by a transparent polycarbonate cover.
The maximum productivity of the pump series is 100 l/hour.
General information
emypool series
Peristaltic dispensers with built-in PH or RX level controller.
The pumps are made in an acid-resistant plastic housing. The front panel features a backlit digital display.
Dosing of reagents is carried out in proportional mode according to a given PH or RX level.
General information
etwin series
This is a series of peristaltic dispensers with a built-in controller that operate simultaneously in two parameters. Used to control PH, RX or CL levels.
The pumps are made in an acid-resistant plastic housing. The front panel features a backlit digital display.
Dosing of reagents is carried out in proportional mode according to a given level of PH, RX or CL.
General information
BIO clean control series
This is a series of peristaltic dispensers complete with a built-in timer, designed for timed dosing.
The pumps are made in an acid-resistant plastic housing.
The built-in digital timer has eight cycles for programming daily or weekly operation.
Data
TECHNICAL SPECIFICATIONS
Max flow rate, l/h
6
Max pressure, bar
1
Max rotational speed, rpm
108
Max suction height, m
2
Connection, mm
4х6
Voltage, V
230 (12/24)
Consumed power, W
3,5 - 4,0
Data
TECHNICAL SPECIFICATIONS
Max flow rate, l/h
12
Max pressure, bar
3
Max rotational speed, rpm
108
Max suction height, m
2
Connection, mm
4х6
Voltage, V
230 (12/24)
Consumed power, W
5,0 - 6,0
TECHNICAL SPECIFICATIONS
Max flow rate, l/h
100
Max pressure, bar
1.5
Max rotational speed, rpm
150
Max suction height, m
2
Connection, mm
10х14
Voltage, V
230
Consumed power, W
20
TECHNICAL SPECIFICATIONS
Max flow rate, l/h
3
Max pressure, bar
3
Max suction height, m
2
Connection, mm
4х6
Voltage, V
230
Protection
IP65
pH measurement range
5-9
RX measurement range, mV
-300 +900
TECHNICAL SPECIFICATIONS
Max flow rate, l/h
3
Max pressure, bar
3
Max suction height, m
2
Connection, mm
4х6
Voltage, V
230
Protection
IP65
pH measurement range
0-14
RX measurement range, mV
0-1000
Measurement range CL, ppm
0-2
0-20
TECHNICAL SPECIFICATIONS
Max flow rate, l/h
3
Max pressure, bar
3
Max suction height, m
2
Connection, mm
4х6
Voltage, V
230
Protection
IP65
Management
F series models
Presented in various options to more flexibly approach the dosage management process for each specific task.
F PER
Peristaltic non-housed dispensers with fixed performance.
F-T PER
Peristaltic non-housed dispensers with adjustable output based on a timer.
Management
Models of the B series
Presented in various options to more flexibly approach the dosage management process for each specific task.
B3-V PER
Peristaltic compact dispensers with adjustable performance in the range of 10-100% of output.
B-FCD PER
Peristaltic compact dispensers that maintain a specified concentration of detergents in the system, operating based on conductivity values (measurement range
3.000 – 20.000 µS).
General information
F series
F is a series of frameless compact peristaltic dosing pumps with constant performance. Designed for organizing non-pressure dosing.
The pumps are made in an acid-resistant plastic case, the working body and hose are protected by a transparent polycarbonate cover.
Dosing mode: basic ON/OFF, performance adjustment on request.
Management
F series models
Presented in various options to more flexibly approach the dosage management process for each specific task.
F PER
Peristaltic non-housed dispensers with fixed performance.
F-T PER
Peristaltic non-housed dispensers with adjustable output based on a timer.
Data
TECHNICAL SPECIFICATIONS
Max flow rate, l/h
6
Max pressure, bar
1
Max rotational speed, rpm
108
Max suction height, m
2
Connection, mm
4х6
Voltage, V
230 (12/24)
Consumed power, W
3,5 - 4,0
General information
B series
Peristaltic compact dispensers with adjustable output in the range of 10-100% output. Adjustment is made using a potentiometer.
The pumps are made in an acid-resistant plastic case, the working body and hose are protected by a transparent polycarbonate cover.
There is an LED indicator on the front side to display the operating mode.
Management
Models of the B series
Presented in various options to more flexibly approach the dosage management process for each specific task.
B3-V PER
Peristaltic compact dispensers with adjustable performance in the range of 10-100% of output.
B-FCD PER
Peristaltic compact dispensers that maintain a specified concentration of detergents in the system, operating based on conductivity values (measurement range
3.000 – 20.000 µS).
Data
TECHNICAL SPECIFICATIONS
Max flow rate, l/h
12
Max pressure, bar
3
Max rotational speed, rpm
108
Max suction height, m
2
Connection, mm
4х6
Voltage, V
230 (12/24)
Consumed power, W
5,0 - 6,0
General information
BH series
Peristaltic dispensers with increased productivity. Performance adjustment is carried out using a potentiometer in the range of 0-100%.
The pumps are made in an acid-resistant plastic case, the working body and hose are protected by a transparent polycarbonate cover.
The maximum productivity of the pump series is 100 l/hour.
Data
TECHNICAL SPECIFICATIONS
Max flow rate, l/h
100
Max pressure, bar
1,5
Max rotational speed, rpm
150
Max suction height, m
2
Connection, mm
10х14
Voltage, V
230
Consumed power, kW
20
General information
emypool series
Peristaltic dispensers with built-in PH or RX level controller.
The pumps are made in an acid-resistant plastic housing. The front panel features a backlit digital display.
Dosing of reagents is carried out in proportional mode according to a given PH or RX level.
Data
TECHNICAL SPECIFICATIONS
Max flow rate, l/h
3
Max pressure, bar
3
Max suction height, m
2
Connection, mm
4х6
Voltage, V
230
Protection
IP65
pH measurement range
5-9
RX measurement range, mV
-300 +900
General information
etwin series
This is a series of peristaltic dispensers with a built-in controller that operate simultaneously in two parameters. Used to control PH, RX or CL levels.
The pumps are made in an acid-resistant plastic housing. The front panel features a backlit digital display.
Dosing of reagents is carried out in proportional mode according to a given level of PH, RX or CL.
Data
TECHNICAL SPECIFICATIONS
Max flow rate, l/h
3
Max pressure, bar
3
Max suction height, m
2
Connection, mm
4х6
Voltage, V
230
Protection
IP65
pH measurement range
0-14
RX measurement range, mV
0-1000
Measurement range CL, ppm
0-2
0-20
General information
BIO clean control series
This is a series of peristaltic dispensers complete with a built-in timer, designed for timed dosing.
The pumps are made in an acid-resistant plastic housing.
The built-in digital timer has eight cycles for programming daily or weekly operation.
Data
TECHNICAL SPECIFICATIONS
Max flow rate, l/h
3
Max pressure, bar
3
Max suction height, m
2
Connection, mm
4х6
Voltage, V
230
Protection
IP65
Contacts
CONTACT US
we’ll help you solve all your questions:
+375 17 3780922
Contact center
+375 29 1319115
For legal entities
info@ntbel.com
Minsk, Babushkina St.,
6A, office 314, 220024
Address
or
fill out the form:
Applications
Application sectors
they can be used in following industries:
Production of biodiesel
Ceramic, stone, marble and glass
Sector of the chemical industry
Sector of graphic industry
Galvanic and electronic industry
Manufacture of motor vehicles
Mechanical industry
Sector of paint industry
Sector of Oil & Gas
Gold processing industry
Water treatment industry
Textile and leather
Packing, glue, paper and paper
Applications
Application sectors
they can be used in following industries:
Production of biodiesel
Manufacture of motor vehicles
Textile and leather industry
Ceramic, stone, marble and glass
Mechanical industry
Sector of the chemical industry
Sector of paint industry
Sector of graphic industry
Sector of Oil & Gas
Packing, glue, paper and paper
Galvanic and electronic industry
Water treatment industry
Applications
Application sectors
they can be used in following industries:
Production and storage of biodiesel
Manufacture of motor vehicles
Textile and leather
Ceramic, stone, marble, glass and mining industry
Mechanical industry
Sector of the chemical industry
Paint industry
Sector of graphic industry
Oil & Gas
Packing, glue, paper and paper mill
Gold processing industry
Galvanic and electronic industry
Water treatment industry
General information
F series
F is a series of frameless compact peristaltic dosing pumps with constant performance. Designed for organizing non-pressure dosing.
The pumps are made in an acid-resistant plastic case, the working body and hose are protected by a transparent polycarbonate cover.
Dosing mode: basic ON/OFF, performance adjustment on request.
General information
B series
Peristaltic compact dispensers with adjustable output in the range of 10-100% output. Adjustment is made using a potentiometer.
The pumps are made in an acid-resistant plastic case, the working body and hose are protected by a transparent polycarbonate cover.
There is an LED indicator on the front side to display the operating mode.
General information
BH series
Peristaltic dispensers with increased productivity. Performance adjustment is carried out using a potentiometer in the range of 0-100%.
The pumps are made in an acid-resistant plastic case, the working body and hose are protected by a transparent polycarbonate cover.
The maximum productivity of the pump series is 100 l/hour.
General information
emypool series
Peristaltic dispensers with built-in PH or RX level controller.
The pumps are made in an acid-resistant plastic housing. The front panel features a backlit digital display.
Dosing of reagents is carried out in proportional mode according to a given PH or RX level.
General information
etwin series
This is a series of peristaltic dispensers with a built-in controller that operate simultaneously in two parameters. Used to control PH, RX or CL levels.
The pumps are made in an acid-resistant plastic housing. The front panel features a backlit digital display.
Dosing of reagents is carried out in proportional mode according to a given level of PH, RX or CL.
General information
BIO clean control series
This is a series of peristaltic dispensers complete with a built-in timer, designed for timed dosing.
The pumps are made in an acid-resistant plastic housing.
The built-in digital timer has eight cycles for programming daily or weekly operation.
Data
TECHNICAL SPECIFICATIONS
Max flow rate, l/h
6
Max pressure, bar
1
Max rotational speed, rpm
108
Max suction height, m
2
Connection, mm
4х6
Voltage, V
230 (12/24)
Consumed power, W
3,5 - 4,0
Data
TECHNICAL SPECIFICATIONS
Max flow rate, l/h
12
Max pressure, bar
3
Max rotational speed, rpm
108
Max suction height, m
2
Connection, mm
4х6
Voltage, V
230 (12/24)
Consumed power, W
5,0 - 6,0
TECHNICAL SPECIFICATIONS
Max flow rate, l/h
100
Max pressure, bar
1.5
Max rotational speed, rpm
150
Max suction height, m
2
Connection, mm
10х14
Voltage, V
230
Consumed power, W
20
TECHNICAL SPECIFICATIONS
Max flow rate, l/h
3
Max pressure, bar
3
Max suction height, m
2
Connection, mm
4х6
Voltage, V
230
Protection
IP65
pH measurement range
5-9
RX measurement range, mV
-300 +900
TECHNICAL SPECIFICATIONS
Max flow rate, l/h
3
Max pressure, bar
3
Max suction height, m
2
Connection, mm
4х6
Voltage, V
230
Protection
IP65
pH measurement range
0-14
RX measurement range, mV
0-1000
Measurement range CL, ppm
0-2
0-20
TECHNICAL SPECIFICATIONS
Max flow rate, l/h
3
Max pressure, bar
3
Max suction height, m
2
Connection, mm
4х6
Voltage, V
230
Protection
IP65
Management
F series models
Presented in various options to more flexibly approach the dosage management process for each specific task.
F PER
Peristaltic non-housed dispensers with fixed performance.
F-T PER
Peristaltic non-housed dispensers with adjustable output based on a timer.
Management
Models of the B series
Presented in various options to more flexibly approach the dosage management process for each specific task.
B3-V PER
Peristaltic compact dispensers with adjustable performance in the range of 10-100% of output.
B-FCD PER
Peristaltic compact dispensers that maintain a specified concentration of detergents in the system, operating based on conductivity values (measurement range
3.000 – 20.000 µS).
General information
F series
F is a series of frameless compact peristaltic dosing pumps with constant performance. Designed for organizing non-pressure dosing.
The pumps are made in an acid-resistant plastic case, the working body and hose are protected by a transparent polycarbonate cover.
Dosing mode: basic ON/OFF, performance adjustment on request.
Management
F series models
Presented in various options to more flexibly approach the dosage management process for each specific task.
F PER
Peristaltic non-housed dispensers with fixed performance.
F-T PER
Peristaltic non-housed dispensers with adjustable output based on a timer.
Data
TECHNICAL SPECIFICATIONS
Max flow rate, l/h
6
Max pressure, bar
1
Max rotational speed, rpm
108
Max suction height, m
2
Connection, mm
4х6
Voltage, V
230 (12/24)
Consumed power, W
3,5 - 4,0
General information
B series
Peristaltic compact dispensers with adjustable output in the range of 10-100% output. Adjustment is made using a potentiometer.
The pumps are made in an acid-resistant plastic case, the working body and hose are protected by a transparent polycarbonate cover.
There is an LED indicator on the front side to display the operating mode.
Management
Models of the B series
Presented in various options to more flexibly approach the dosage management process for each specific task.
B3-V PER
Peristaltic compact dispensers with adjustable performance in the range of 10-100% of output.
B-FCD PER
Peristaltic compact dispensers that maintain a specified concentration of detergents in the system, operating based on conductivity values (measurement range
3.000 – 20.000 µS).
Data
TECHNICAL SPECIFICATIONS
Max flow rate, l/h
12
Max pressure, bar
3
Max rotational speed, rpm
108
Max suction height, m
2
Connection, mm
4х6
Voltage, V
230 (12/24)
Consumed power, W
5,0 - 6,0
General information
BH series
Peristaltic dispensers with increased productivity. Performance adjustment is carried out using a potentiometer in the range of 0-100%.
The pumps are made in an acid-resistant plastic case, the working body and hose are protected by a transparent polycarbonate cover.
The maximum productivity of the pump series is 100 l/hour.
Data
TECHNICAL SPECIFICATIONS
Max flow rate, l/h
100
Max pressure, bar
1,5
Max rotational speed, rpm
150
Max suction height, m
2
Connection, mm
10х14
Voltage, V
230
Consumed power, kW
20
General information
emypool series
Peristaltic dispensers with built-in PH or RX level controller.
The pumps are made in an acid-resistant plastic housing. The front panel features a backlit digital display.
Dosing of reagents is carried out in proportional mode according to a given PH or RX level.
Data
TECHNICAL SPECIFICATIONS
Max flow rate, l/h
3
Max pressure, bar
3
Max suction height, m
2
Connection, mm
4х6
Voltage, V
230
Protection
IP65
pH measurement range
5-9
RX measurement range, mV
-300 +900
General information
etwin series
This is a series of peristaltic dispensers with a built-in controller that operate simultaneously in two parameters. Used to control PH, RX or CL levels.
The pumps are made in an acid-resistant plastic housing. The front panel features a backlit digital display.
Dosing of reagents is carried out in proportional mode according to a given level of PH, RX or CL.
Data
TECHNICAL SPECIFICATIONS
Max flow rate, l/h
3
Max pressure, bar
3
Max suction height, m
2
Connection, mm
4х6
Voltage, V
230
Protection
IP65
pH measurement range
0-14
RX measurement range, mV
0-1000
Measurement range CL, ppm
0-2
0-20
General information
BIO clean control series
This is a series of peristaltic dispensers complete with a built-in timer, designed for timed dosing.
The pumps are made in an acid-resistant plastic housing.
The built-in digital timer has eight cycles for programming daily or weekly operation.
Data
TECHNICAL SPECIFICATIONS
Max flow rate, l/h
3
Max pressure, bar
3
Max suction height, m
2
Connection, mm
4х6
Voltage, V
230
Protection
IP65
Contacts
CONTACT US
we’ll help you solve all your questions:
+375 17 3780922
Contact center
+375 29 1319115
For legal entities
info@ntbel.com
Minsk, Babushkina St.,
6A, office 314, 220024
Address
or
fill out the form:
Applications
Application sectors
they can be used in following industries:
Production of biodiesel
Ceramic, stone, marble and glass
Sector of the chemical industry
Sector of graphic industry
Galvanic and electronic industry
Manufacture of motor vehicles
Mechanical industry
Sector of paint industry
Sector of Oil & Gas
Gold processing industry
Water treatment industry
Textile and leather
Packing, glue, paper and paper
Applications
Application sectors
they can be used in following industries:
Production of biodiesel
Manufacture of motor vehicles
Textile and leather industry
Ceramic, stone, marble and glass
Mechanical industry
Sector of the chemical industry
Sector of paint industry
Sector of graphic industry
Sector of Oil & Gas
Packing, glue, paper and paper
Galvanic and electronic industry
Water treatment industry
Applications
Application sectors
they can be used in following industries:
Production and storage of biodiesel
Manufacture of motor vehicles
Textile and leather
Ceramic, stone, marble, glass and mining industry
Mechanical industry
Sector of the chemical industry
Paint industry
Sector of graphic industry
Oil & Gas
Packing, glue, paper and paper mill
Gold processing industry
Galvanic and electronic industry
Water treatment industry
General information
F series
F is a series of frameless compact peristaltic dosing pumps with constant performance. Designed for organizing non-pressure dosing.
The pumps are made in an acid-resistant plastic case, the working body and hose are protected by a transparent polycarbonate cover.
Dosing mode: basic ON/OFF, performance adjustment on request.
General information
B series
Peristaltic compact dispensers with adjustable output in the range of 10-100% output. Adjustment is made using a potentiometer.
The pumps are made in an acid-resistant plastic case, the working body and hose are protected by a transparent polycarbonate cover.
There is an LED indicator on the front side to display the operating mode.
General information
BH series
Peristaltic dispensers with increased productivity. Performance adjustment is carried out using a potentiometer in the range of 0-100%.
The pumps are made in an acid-resistant plastic case, the working body and hose are protected by a transparent polycarbonate cover.
The maximum productivity of the pump series is 100 l/hour.
General information
emypool series
Peristaltic dispensers with built-in PH or RX level controller.
The pumps are made in an acid-resistant plastic housing. The front panel features a backlit digital display.
Dosing of reagents is carried out in proportional mode according to a given PH or RX level.
General information
etwin series
This is a series of peristaltic dispensers with a built-in controller that operate simultaneously in two parameters. Used to control PH, RX or CL levels.
The pumps are made in an acid-resistant plastic housing. The front panel features a backlit digital display.
Dosing of reagents is carried out in proportional mode according to a given level of PH, RX or CL.
General information
BIO clean control series
This is a series of peristaltic dispensers complete with a built-in timer, designed for timed dosing.
The pumps are made in an acid-resistant plastic housing.
The built-in digital timer has eight cycles for programming daily or weekly operation.
Data
TECHNICAL SPECIFICATIONS
Max flow rate, l/h
6
Max pressure, bar
1
Max rotational speed, rpm
108
Max suction height, m
2
Connection, mm
4х6
Voltage, V
230 (12/24)
Consumed power, W
3,5 - 4,0
Data
TECHNICAL SPECIFICATIONS
Max flow rate, l/h
12
Max pressure, bar
3
Max rotational speed, rpm
108
Max suction height, m
2
Connection, mm
4х6
Voltage, V
230 (12/24)
Consumed power, W
5,0 - 6,0
TECHNICAL SPECIFICATIONS
Max flow rate, l/h
100
Max pressure, bar
1.5
Max rotational speed, rpm
150
Max suction height, m
2
Connection, mm
10х14
Voltage, V
230
Consumed power, W
20
TECHNICAL SPECIFICATIONS
Max flow rate, l/h
3
Max pressure, bar
3
Max suction height, m
2
Connection, mm
4х6
Voltage, V
230
Protection
IP65
pH measurement range
5-9
RX measurement range, mV
-300 +900
TECHNICAL SPECIFICATIONS
Max flow rate, l/h
3
Max pressure, bar
3
Max suction height, m
2
Connection, mm
4х6
Voltage, V
230
Protection
IP65
pH measurement range
0-14
RX measurement range, mV
0-1000
Measurement range CL, ppm
0-2
0-20
TECHNICAL SPECIFICATIONS
Max flow rate, l/h
3
Max pressure, bar
3
Max suction height, m
2
Connection, mm
4х6
Voltage, V
230
Protection
IP65
Management
F series models
Presented in various options to more flexibly approach the dosage management process for each specific task.
F PER
Peristaltic non-housed dispensers with fixed performance.
F-T PER
Peristaltic non-housed dispensers with adjustable output based on a timer.
Management
Models of the B series
Presented in various options to more flexibly approach the dosage management process for each specific task.
B3-V PER
Peristaltic compact dispensers with adjustable performance in the range of 10-100% of output.
B-FCD PER
Peristaltic compact dispensers that maintain a specified concentration of detergents in the system, operating based on conductivity values (measurement range
3.000 – 20.000 µS).
General information
F series
F is a series of frameless compact peristaltic dosing pumps with constant performance. Designed for organizing non-pressure dosing.
The pumps are made in an acid-resistant plastic case, the working body and hose are protected by a transparent polycarbonate cover.
Dosing mode: basic ON/OFF, performance adjustment on request.
Management
F series models
Presented in various options to more flexibly approach the dosage management process for each specific task.
F PER
Peristaltic non-housed dispensers with fixed performance.
F-T PER
Peristaltic non-housed dispensers with adjustable output based on a timer.
Data
TECHNICAL SPECIFICATIONS
Max flow rate, l/h
6
Max pressure, bar
1
Max rotational speed, rpm
108
Max suction height, m
2
Connection, mm
4х6
Voltage, V
230 (12/24)
Consumed power, W
3,5 - 4,0
General information
B series
Peristaltic compact dispensers with adjustable output in the range of 10-100% output. Adjustment is made using a potentiometer.
The pumps are made in an acid-resistant plastic case, the working body and hose are protected by a transparent polycarbonate cover.
There is an LED indicator on the front side to display the operating mode.
Management
Models of the B series
Presented in various options to more flexibly approach the dosage management process for each specific task.
B3-V PER
Peristaltic compact dispensers with adjustable performance in the range of 10-100% of output.
B-FCD PER
Peristaltic compact dispensers that maintain a specified concentration of detergents in the system, operating based on conductivity values (measurement range
3.000 – 20.000 µS).
Data
TECHNICAL SPECIFICATIONS
Max flow rate, l/h
12
Max pressure, bar
3
Max rotational speed, rpm
108
Max suction height, m
2
Connection, mm
4х6
Voltage, V
230 (12/24)
Consumed power, W
5,0 - 6,0
General information
BH series
Peristaltic dispensers with increased productivity. Performance adjustment is carried out using a potentiometer in the range of 0-100%.
The pumps are made in an acid-resistant plastic case, the working body and hose are protected by a transparent polycarbonate cover.
The maximum productivity of the pump series is 100 l/hour.
Data
TECHNICAL SPECIFICATIONS
Max flow rate, l/h
100
Max pressure, bar
1,5
Max rotational speed, rpm
150
Max suction height, m
2
Connection, mm
10х14
Voltage, V
230
Consumed power, kW
20
General information
emypool series
Peristaltic dispensers with built-in PH or RX level controller.
The pumps are made in an acid-resistant plastic housing. The front panel features a backlit digital display.
Dosing of reagents is carried out in proportional mode according to a given PH or RX level.
Data
TECHNICAL SPECIFICATIONS
Max flow rate, l/h
3
Max pressure, bar
3
Max suction height, m
2
Connection, mm
4х6
Voltage, V
230
Protection
IP65
pH measurement range
5-9
RX measurement range, mV
-300 +900
General information
etwin series
This is a series of peristaltic dispensers with a built-in controller that operate simultaneously in two parameters. Used to control PH, RX or CL levels.
The pumps are made in an acid-resistant plastic housing. The front panel features a backlit digital display.
Dosing of reagents is carried out in proportional mode according to a given level of PH, RX or CL.
Data
TECHNICAL SPECIFICATIONS
Max flow rate, l/h
3
Max pressure, bar
3
Max suction height, m
2
Connection, mm
4х6
Voltage, V
230
Protection
IP65
pH measurement range
0-14
RX measurement range, mV
0-1000
Measurement range CL, ppm
0-2
0-20
General information
BIO clean control series
This is a series of peristaltic dispensers complete with a built-in timer, designed for timed dosing.
The pumps are made in an acid-resistant plastic housing.
The built-in digital timer has eight cycles for programming daily or weekly operation.
Data
TECHNICAL SPECIFICATIONS
Max flow rate, l/h
3
Max pressure, bar
3
Max suction height, m
2
Connection, mm
4х6
Voltage, V
230
Protection
IP65
Contacts
CONTACT US
we’ll help you solve all your questions:
+375 17 3780922
Contact center
+375 29 1319115
For legal entities
info@ntbel.com
Minsk, Babushkina St.,
6A, office 314, 220024
Address
or
fill out the form:
Applications
Application sectors
they can be used in following industries:
Production of biodiesel
Ceramic, stone, marble and glass
Sector of the chemical industry
Sector of graphic industry
Galvanic and electronic industry
Manufacture of motor vehicles
Mechanical industry
Sector of paint industry
Sector of Oil & Gas
Gold processing industry
Water treatment industry
Textile and leather
Packing, glue, paper and paper
Applications
Application sectors
they can be used in following industries:
Production of biodiesel
Manufacture of motor vehicles
Textile and leather industry
Ceramic, stone, marble and glass
Mechanical industry
Sector of the chemical industry
Sector of paint industry
Sector of graphic industry
Sector of Oil & Gas
Packing, glue, paper and paper
Galvanic and electronic industry
Water treatment industry
Applications
Application sectors
they can be used in following industries:
Production and storage of biodiesel
Manufacture of motor vehicles
Textile and leather
Ceramic, stone, marble, glass and mining industry
Mechanical industry
Sector of the chemical industry
Paint industry
Sector of graphic industry
Oil & Gas
Packing, glue, paper and paper mill
Gold processing industry
Galvanic and electronic industry
Water treatment industry