General information
original series
DLX — это популярная серия электромагнитных дозирующих насосов, широко применяемая в водоподготовке, очистке сточных вод, пищевой и химической промышленности, гальванике и других отраслях.
Насосы выполнены в антикислотном пластиковом корпусе, а панель управления защищена УФ-плёнкой. Проточная часть изготовлена из PVDF, что обеспечивает возможность дозирования практически любых агрессивных химических реагентов.
Широкий модельный ряд позволяет реализовать различные режимы управления и дозирования, от базового ON/OFF режима до внешнего управления процессом дозирования в потоке.
DLX is a popular series of electromagnetic metering pumps, widely used in water treatment, wastewater treatment, food processing, chemical processing, electroplating and other industries.
The pumps are made in an acid-resistant plastic case, and the control panel is protected by UV film. The flow part is made of PVDF, which makes it possible to dispense almost any aggressive chemical reagents.
A wide range of models allows you to implement various control and dosing modes, from the basic ON/OFF mode to external control of the dosing process in the flow.
Data
TECHNICAL SPECIFICATIONS
Max flow rate, l/h
24
Max pressure, bar
20
Max strokes per minute
120
Max suction height, m
2
Connection, mm
4х6
Voltage, V
230
Current, Hz
50
Consumed power, W
37-58
Net weight, kg
2,3-2,9
Protection
IP 65
Management
Models of the dlx series
Available in a variety of options to provide a more flexible approach to the dosing control process for each specific task.
MA/AD
Analog model with manual ON/OFF dosing mode.
MA/MB
Digital model with manual ON/OFF dosing mode.
CC/M
Proportional dosing from an external mA signal, as well as a constant ON/OFF mode.
VFT/MBB
Proportional dosing from the pulse flow meter and manual ON/OFF mode.
MF/M
Proportional dosing from the pulse flowmeter, from the external mA signal and manual ON/OFF mode.
PH-RX/MBB
Proportional dosing from the pH or RX sensor with a built-in controller, as well as a manual ON/OFF mode.
PH-RX-CL
Proportional dosing from the pH, RX, or CL sensor with a built-in controller and a manual ON/OFF mode.
PVDF
maximum chemical resistance
to any aggressive chemicals
DLX is the original
series of dosing
pumps
General information
original series
DLX is a popular series of electromagnetic metering pumps, widely used in water treatment, wastewater treatment, food processing, chemical processing, electroplating and other industries.
The pumps are made in an acid-resistant plastic case, and the control panel is protected by UV film. The flow part is made of PVDF, which makes it possible to dispense almost any aggressive chemical reagents.
A wide range of models allows you to implement various control and dosing modes, from the basic ON/OFF mode to external control of the dosing process in the flow.
Management
Models of the dlx series
Presented in various options to provide more flexibility in the dosing management process for each specific task.
MA/AD
Analog model with manual ON/OFF dosing mode.
MA/MB
Digital model with manual ON/OFF dosing mode.
CC/M
Пропорциональное дозирование от внешнего mA сигнала, а также постоянный ON/OFF режим.
VFT/MBB
Proportional dosing from the pulse flow meter and manual ON/OFF mode.
MF/M
Proportional dosing from the pulse flowmeter, from the external mA signal and manual ON/OFF mode.
PH-RX/MBB
Proportional dosing from the pH or RX sensor with a built-in controller, as well as a manual ON/OFF mode.
PH-RX-CL
Proportional dosing from the pH, RX, or CL sensor with a built-in controller and a manual ON/OFF mode.
Data
TECHNICAL CHARACTERISTICS
Max flow rate, l/h
24
Max pressure, bar
20
Max strokes per minute
120
Max suction height, m
2
Connection, mm
4х6
Voltage, V
230
Current, Hz
50
Consumed power, W
37-58
Net weight, kg
2,3-2,9
Protection
IP 65
Contacts
CONTACT US
we’ll help you solve all your questions:
+375 17 3780922
Contact center
+375 29 1319115
For legal entities
info@ntbel.com
г. Минск, ул. Бабушкина,
6А, офис 314, 220024
Address
or
fill out the form:
Секторы
Сферы применения
дозирующих насосов серии DLX:
Производство и работа с топливом
Производство стекла и керамики
Химическая промышленность
Графическая промышленность
Гальваника
Автомобилестроение
Металлургическая промышленность
Лакокрасочная промышленность
Нефтяная промышленность
Производство золота
Промышленная водоподготовка
Текстильная промышленность
Целлюлозно-бумажное производство
Applications
Application sectors
they can be used in following industries:
Production and storage of biodiesel
Ceramic, stone, marble, glass and mining industry
Sector of the chemical industry
Sector of graphic industry
Galvanic and electronic industry
Manufacture of motor vehicles
Mechanical industry
Paint industry
Oil & Gas
Gold processing industry
Water treatment industry
Textile and leather
Packing, glue, paper and paper mill
Applications
Application sectors
they can be used in following industries:
Production and storage of biodiesel
Manufacture of motor vehicles
Textile and leather
Ceramic, stone, marble, glass and mining industry
Mechanical industry
Sector of the chemical industry
Paint industry
Sector of graphic industry
Oil & Gas
Packing, glue, paper and paper mill
Gold processing industry
Galvanic and electronic industry
Water treatment industry
Applications
Application sectors
they can be used in following industries:
Production of biodiesel
Manufacture of motor vehicles
Textile and leather industry
Ceramic, stone, marble and glass
Mechanical industry
Sector of the chemical industry
Sector of paint industry
Sector of graphic industry
Sector of Oil & Gas
Packing, glue, paper and paper
Galvanic and electronic industry
Water treatment industry
General information
original series
DLX — это популярная серия электромагнитных дозирующих насосов, широко применяемая в водоподготовке, очистке сточных вод, пищевой и химической промышленности, гальванике и других отраслях.
Насосы выполнены в антикислотном пластиковом корпусе, а панель управления защищена УФ-плёнкой. Проточная часть изготовлена из PVDF, что обеспечивает возможность дозирования практически любых агрессивных химических реагентов.
Широкий модельный ряд позволяет реализовать различные режимы управления и дозирования, от базового ON/OFF режима до внешнего управления процессом дозирования в потоке.
DLX is a popular series of electromagnetic metering pumps, widely used in water treatment, wastewater treatment, food processing, chemical processing, electroplating and other industries.
The pumps are made in an acid-resistant plastic case, and the control panel is protected by UV film. The flow part is made of PVDF, which makes it possible to dispense almost any aggressive chemical reagents.
A wide range of models allows you to implement various control and dosing modes, from the basic ON/OFF mode to external control of the dosing process in the flow.
Data
TECHNICAL SPECIFICATIONS
Max flow rate, l/h
24
Max pressure, bar
20
Max strokes per minute
120
Max suction height, m
2
Connection, mm
4х6
Voltage, V
230
Current, Hz
50
Consumed power, W
37-58
Net weight, kg
2,3-2,9
Protection
IP 65
Management
Models of the dlx series
Available in a variety of options to provide a more flexible approach to the dosing control process for each specific task.
MA/AD
Analog model with manual ON/OFF dosing mode.
MA/MB
Digital model with manual ON/OFF dosing mode.
CC/M
Proportional dosing from an external mA signal, as well as a constant ON/OFF mode.
VFT/MBB
Proportional dosing from the pulse flow meter and manual ON/OFF mode.
MF/M
Proportional dosing from the pulse flowmeter, from the external mA signal and manual ON/OFF mode.
PH-RX/MBB
Proportional dosing from the pH or RX sensor with a built-in controller, as well as a manual ON/OFF mode.
PH-RX-CL
Proportional dosing from the pH, RX, or CL sensor with a built-in controller and a manual ON/OFF mode.
PVDF
maximum chemical resistance
to any aggressive chemicals
DLX is the original
series of dosing
pumps
General information
original series
DLX is a popular series of electromagnetic metering pumps, widely used in water treatment, wastewater treatment, food processing, chemical processing, electroplating and other industries.
The pumps are made in an acid-resistant plastic case, and the control panel is protected by UV film. The flow part is made of PVDF, which makes it possible to dispense almost any aggressive chemical reagents.
A wide range of models allows you to implement various control and dosing modes, from the basic ON/OFF mode to external control of the dosing process in the flow.
Management
Models of the dlx series
Presented in various options to provide more flexibility in the dosing management process for each specific task.
MA/AD
Analog model with manual ON/OFF dosing mode.
MA/MB
Digital model with manual ON/OFF dosing mode.
CC/M
Пропорциональное дозирование от внешнего mA сигнала, а также постоянный ON/OFF режим.
VFT/MBB
Proportional dosing from the pulse flow meter and manual ON/OFF mode.
MF/M
Proportional dosing from the pulse flowmeter, from the external mA signal and manual ON/OFF mode.
PH-RX/MBB
Proportional dosing from the pH or RX sensor with a built-in controller, as well as a manual ON/OFF mode.
PH-RX-CL
Proportional dosing from the pH, RX, or CL sensor with a built-in controller and a manual ON/OFF mode.
Data
TECHNICAL CHARACTERISTICS
Max flow rate, l/h
24
Max pressure, bar
20
Max strokes per minute
120
Max suction height, m
2
Connection, mm
4х6
Voltage, V
230
Current, Hz
50
Consumed power, W
37-58
Net weight, kg
2,3-2,9
Protection
IP 65
Contacts
CONTACT US
we’ll help you solve all your questions:
+375 17 3780922
Contact center
+375 29 1319115
For legal entities
info@ntbel.com
г. Минск, ул. Бабушкина,
6А, офис 314, 220024
Address
or
fill out the form:
Секторы
Сферы применения
дозирующих насосов серии DLX:
Производство и работа с топливом
Производство стекла и керамики
Химическая промышленность
Графическая промышленность
Гальваника
Автомобилестроение
Металлургическая промышленность
Лакокрасочная промышленность
Нефтяная промышленность
Производство золота
Промышленная водоподготовка
Текстильная промышленность
Целлюлозно-бумажное производство
Applications
Application sectors
they can be used in following industries:
Production and storage of biodiesel
Ceramic, stone, marble, glass and mining industry
Sector of the chemical industry
Sector of graphic industry
Galvanic and electronic industry
Manufacture of motor vehicles
Mechanical industry
Paint industry
Oil & Gas
Gold processing industry
Water treatment industry
Textile and leather
Packing, glue, paper and paper mill
Applications
Application sectors
they can be used in following industries:
Production and storage of biodiesel
Manufacture of motor vehicles
Textile and leather
Ceramic, stone, marble, glass and mining industry
Mechanical industry
Sector of the chemical industry
Paint industry
Sector of graphic industry
Oil & Gas
Packing, glue, paper and paper mill
Gold processing industry
Galvanic and electronic industry
Water treatment industry
Applications
Application sectors
they can be used in following industries:
Production of biodiesel
Manufacture of motor vehicles
Textile and leather industry
Ceramic, stone, marble and glass
Mechanical industry
Sector of the chemical industry
Sector of paint industry
Sector of graphic industry
Sector of Oil & Gas
Packing, glue, paper and paper
Galvanic and electronic industry
Water treatment industry
General information
original series
DLX — это популярная серия электромагнитных дозирующих насосов, широко применяемая в водоподготовке, очистке сточных вод, пищевой и химической промышленности, гальванике и других отраслях.
Насосы выполнены в антикислотном пластиковом корпусе, а панель управления защищена УФ-плёнкой. Проточная часть изготовлена из PVDF, что обеспечивает возможность дозирования практически любых агрессивных химических реагентов.
Широкий модельный ряд позволяет реализовать различные режимы управления и дозирования, от базового ON/OFF режима до внешнего управления процессом дозирования в потоке.
DLX is a popular series of electromagnetic metering pumps, widely used in water treatment, wastewater treatment, food processing, chemical processing, electroplating and other industries.
The pumps are made in an acid-resistant plastic case, and the control panel is protected by UV film. The flow part is made of PVDF, which makes it possible to dispense almost any aggressive chemical reagents.
A wide range of models allows you to implement various control and dosing modes, from the basic ON/OFF mode to external control of the dosing process in the flow.
Data
TECHNICAL SPECIFICATIONS
Max flow rate, l/h
24
Max pressure, bar
20
Max strokes per minute
120
Max suction height, m
2
Connection, mm
4х6
Voltage, V
230
Current, Hz
50
Consumed power, W
37-58
Net weight, kg
2,3-2,9
Protection
IP 65
Management
Models of the dlx series
Available in a variety of options to provide a more flexible approach to the dosing control process for each specific task.
MA/AD
Analog model with manual ON/OFF dosing mode.
MA/MB
Digital model with manual ON/OFF dosing mode.
CC/M
Proportional dosing from an external mA signal, as well as a constant ON/OFF mode.
VFT/MBB
Proportional dosing from the pulse flow meter and manual ON/OFF mode.
MF/M
Proportional dosing from the pulse flowmeter, from the external mA signal and manual ON/OFF mode.
PH-RX/MBB
Proportional dosing from the pH or RX sensor with a built-in controller, as well as a manual ON/OFF mode.
PH-RX-CL
Proportional dosing from the pH, RX, or CL sensor with a built-in controller and a manual ON/OFF mode.
PVDF
maximum chemical resistance
to any aggressive chemicals
DLX is the original
series of dosing
pumps
General information
original series
DLX is a popular series of electromagnetic metering pumps, widely used in water treatment, wastewater treatment, food processing, chemical processing, electroplating and other industries.
The pumps are made in an acid-resistant plastic case, and the control panel is protected by UV film. The flow part is made of PVDF, which makes it possible to dispense almost any aggressive chemical reagents.
A wide range of models allows you to implement various control and dosing modes, from the basic ON/OFF mode to external control of the dosing process in the flow.
Management
Models of the dlx series
Presented in various options to provide more flexibility in the dosing management process for each specific task.
MA/AD
Analog model with manual ON/OFF dosing mode.
MA/MB
Digital model with manual ON/OFF dosing mode.
CC/M
Пропорциональное дозирование от внешнего mA сигнала, а также постоянный ON/OFF режим.
VFT/MBB
Proportional dosing from the pulse flow meter and manual ON/OFF mode.
MF/M
Proportional dosing from the pulse flowmeter, from the external mA signal and manual ON/OFF mode.
PH-RX/MBB
Proportional dosing from the pH or RX sensor with a built-in controller, as well as a manual ON/OFF mode.
PH-RX-CL
Proportional dosing from the pH, RX, or CL sensor with a built-in controller and a manual ON/OFF mode.
Data
TECHNICAL CHARACTERISTICS
Max flow rate, l/h
24
Max pressure, bar
20
Max strokes per minute
120
Max suction height, m
2
Connection, mm
4х6
Voltage, V
230
Current, Hz
50
Consumed power, W
37-58
Net weight, kg
2,3-2,9
Protection
IP 65
Contacts
CONTACT US
we’ll help you solve all your questions:
+375 17 3780922
Contact center
+375 29 1319115
For legal entities
info@ntbel.com
г. Минск, ул. Бабушкина,
6А, офис 314, 220024
Address
or
fill out the form:
Секторы
Сферы применения
дозирующих насосов серии DLX:
Производство и работа с топливом
Производство стекла и керамики
Химическая промышленность
Графическая промышленность
Гальваника
Автомобилестроение
Металлургическая промышленность
Лакокрасочная промышленность
Нефтяная промышленность
Производство золота
Промышленная водоподготовка
Текстильная промышленность
Целлюлозно-бумажное производство
Applications
Application sectors
they can be used in following industries:
Production and storage of biodiesel
Ceramic, stone, marble, glass and mining industry
Sector of the chemical industry
Sector of graphic industry
Galvanic and electronic industry
Manufacture of motor vehicles
Mechanical industry
Paint industry
Oil & Gas
Gold processing industry
Water treatment industry
Textile and leather
Packing, glue, paper and paper mill
Applications
Application sectors
they can be used in following industries:
Production and storage of biodiesel
Manufacture of motor vehicles
Textile and leather
Ceramic, stone, marble, glass and mining industry
Mechanical industry
Sector of the chemical industry
Paint industry
Sector of graphic industry
Oil & Gas
Packing, glue, paper and paper mill
Gold processing industry
Galvanic and electronic industry
Water treatment industry
Applications
Application sectors
they can be used in following industries:
Production of biodiesel
Manufacture of motor vehicles
Textile and leather industry
Ceramic, stone, marble and glass
Mechanical industry
Sector of the chemical industry
Sector of paint industry
Sector of graphic industry
Sector of Oil & Gas
Packing, glue, paper and paper
Galvanic and electronic industry
Water treatment industry